Tonight I fabricated the bracket that will
hold the filter in position. This piece
will be fixed to the internal piece using rivnuts which will allow the filter
to be removed for cleaning purposes.
I cut out the filter shape so as not to
cover any of the filter element but to ensure it will hold the filter firmly in
position. The corners were bent and
drilled and rivnuts fixed to the internal piece. The other end will be held in by a small lip
on the internal piece.
I fitted the internal piece again with sikaflex
and rivets, ensuring that all gaps in the box were fully sealed. It doesn’t look too pretty buy hopefully it
should be airtight and not affect the smooth airflow through the box too much.
No comments:
Post a Comment