My Fix8 order arrived! I ordered various assorted bolts and rivnuts
including some M12 x 50mm socket cap bolts.
This meant I could get the diff into position.
Continued with the nearside suspension and
again fitted the caliper..
The 50 x 25 x 200mm block of aluminium also
arrived so I started cutting out for the master cylinder packer by hand. I will continue this with the angle grinder
tomorrow.
I also assembled the front suspension to see what it would look like. This will all need removing again so I didn't to the bolts up too tight.
I also had a go at fitting the front calipers. I went for Wilwood powerlites in the end.
No comments:
Post a Comment