Rear suspension and fitting differential

My Fix8 order arrived!  I ordered various assorted bolts and rivnuts including some M12 x 50mm socket cap bolts.  This meant I could get the diff into position.

Continued with the nearside suspension and again fitted the caliper..

The 50 x 25 x 200mm block of aluminium also arrived so I started cutting out for the master cylinder packer by hand.  I will continue this with the angle grinder tomorrow.

I also assembled the front suspension to see what it would look like.  This will all need removing again so I didn't to the bolts up too tight.

I also had a go at fitting the front calipers.  I went for Wilwood powerlites in the end.