As previously mentioned I ordered some new brake hoses for the rear as the standard ones clashed with my wheels. I bought 300mm long hoses with a male bulkhead M10x1.0mm at one end and a M10 banjo with a 20 degree bend at the other. These allow the hose to point away from the wheel and not clash. I need to re-bleed the system but I will do this at the weekend.
I also finished tidying the electrics. Under the arches I soldered and heatshrinked the side repeaters onto the loom, wrapped in tape and secured to the cable tie bases. I also wrapped the wires going to the fog light so 100% of the electrics are now complete.
No comments:
Post a Comment