Tonight I tried to wire up the
headlights. The dipped and main beams
work by relays due to the high current drawn.
The relays have a feed from the fuses, and the coil is activaged by
switching the negative (i.e. the switch grounds the feed through the coil which
activated the relay.
The main beam has a cable in the dash
bundle of wires for the telltale light.
I wired this into the LED on the savage switch so that it turns on when
the main beam is activated.
The dipped beam doesn’t have a telltale so
I will take a feed from the switch side of the relay.
No comments:
Post a Comment