Made some good progress today! I continued plugging everything in on the
bike loom, filled the engine with 3.5 litres of oil and managed to get it to turn
over!!
The ignition key works, powering up the
first relay and lighting up the dials and causing the TBs to open and
close. The engine start button then
engages the crank and clutch relays which turns the engine over. I am very pleased to get this far with it and
looking forward to putting petrol in it soon.
I finished the fuel line today as well,
going from the 10mm copper to the throttle bodies and securing with 4no jubilee
clips.
I also started connecting up other
electrical elements, e.g. front headlights.
My plan is to get everything wired up and working before going back to
tidy it all up, shorten wires and redo connections.
No comments:
Post a Comment